Steel Day 2026
Important Information for Registered Guests
STEELDAY 2026 - Guest Information
Download Your Guest Information Packet:
The packet includes everything you need to plan for your visit to High Steel, including the event program, morning and afternoon session locations, parking map, and shop tour dress code and safety guidelines.
Morning Program
Project Showcase
Address: St Joseph’s University, 850 Greenfield Rd, Lancaster, PA 17601
Our technical session venue is the High Auditorium at St. Joseph's University. The entrance is located at the rear of the Cooper Building. Please plan to arrive and check in between 8:00 and 9:00 AM.
--Download the Campus Map with Driving Directions--.
MORNING PROGRAM:
8:00 - 9:30 Guest arrival and refreshments
9:30 - Program begins
Welcome and Opening Remarks
Presentations
Design of the Hawk Falls Bridge
Thomas Murphy, Ph.D., P.E., S.E.
Senior Vice President / Chief Technical Officer, Modjeski and Masters
Fabrication of the Hawk Falls Bridge
Brad Dillman, P.E.
Vice President of Engineering and Estimating, High Steel Structures
Adjourn to High Steel Structures for BBQ and Plant Tours
Afternoon Agenda
Open House - BBQ AND SHOP TOURS
Address: High Steel Structures, 1911 Old Philadelphia Pike, Lancaster, PA 17602
After the project showcase, we will drive a short distance to High Steel's Lancaster fabrication facilities for a BBQ picnic and guided shop tours.
There are two driveways next to each other at our facility. Enter the upper parking lot off of Old Philadelphia Pike at the sign marked "Plant One Parking" 1911.
AFTERNOON ACTIVITIES
Noon- 2:30 BBQ Picnic
(Please be seated by 2:00)
12:30-3:00 PM - Shop Tours
Notes:
- We will have vegetarian options available at the picnic.
- Please let us know if you need physical accommodations to participate in the shop tour.
- Please review the safety information below for dress code and tour guidelines.
Important Safety Information
Please review these important safety guidelines:
High Steel Structures LLC holds the safety of all colleagues and visitors as a number one priority. Please follow the guidelines listed below:
- No smoking or Vaping. High Steel’s Facilities are tobacco-free.
- Dress Code for Shop Tour:
- Clothing: Long pants and socks are required. No sleeveless shirts.
- Footwear: Hard-soled shoes or boots. (No sneakers, high-heels, or sandals.)
- PPE
- You are encouraged to bring your own PPE. Hard Hats, Safety Glasses, and Ear Plugs are required. PPE will be provided if you don’t have your own.
- Tour Safety
- Protect your eyes! Do not stare at weld or plasma arcs or flash.
- Stay with your group in the designated walkways. Do not enter individual work areas unless authorized.
- When a crane's horns sounds, stop, look and determine the crane path. Clear yourself of the crane path by moving to designated walkways along the walls. Never position yourself under or near a suspended load.
- Use personnel doors when entering or leaving the fabrication buildings.
- In the unlikely event of an evacuation, proceed in an orderly fashion to the visitor parking area.
- Immediately notify your tour guide or another company representative in the unlikely event of injury. Ask for a First Aid evaluation.
Photo & Video Disclaimer:
This event may be photographed and filmed.
By participating, you grant permission for your image to be used
for promotional purposes, including but not limited to
social media and marketing materials.
Questions about your project?
Do you have questions about best practices in steel bridge design for fabrication?
Need assistance with budget pricing, erecting, or shipping your structural steel?
Reach out to High Steel's experts - we look forward to helping you.
